Fuskar Dutsen LED Panels

The LED Panel Surface Dutsen Kit yana ba da damar duk panel LED panel, backlight LED panel da LED troffer fitilu da za a shigar kai tsaye a kan rufin a cikin muhallin da recessed (t-bar) rufi ba ya samuwa.

• Dutsen LED panels kai tsaye ƙarƙashin nau'ikan rufi iri-iri.
• Ya dace da duk daidaitattun fitilun LED na EU da Amurka.
• Slim 50mm da 70mm tsawo.
• Aluminium mai ɗorewa, fari mai rufi.

Ƙayyadaddun ƙayyadaddun bayanai - Kit ɗin Dutsen Panel Panel na LED

Yadda za a Sanya Firam ɗin Dutsen Panel na LED

Jagorar shigarwa (PDF a sama) yana ba da wakilcin gani na matakai masu zuwa.Duk sassan da ake buƙata (bangaye, skru, wayoyi masu hawa, da matosai) an haɗa su a cikin kit ɗin.

1. Kashe wuta zuwa da'irar haske.
2. Cire sukurori a bayan panel na LED a wurare 6 kamar yadda aka nuna.
3. Haɗa maƙallan hawa guda 6 a waɗannan wurare.
4. Na dabam, sanya firam a kan rufi a cikin wurin da ake so.Alama ramukan huda 4 akan rufin kamar yadda aka nuna.
5. Hana ramukan hawa guda 4 a cikin rufin kuma saka fitattun matosai na filastik.
6. Dutsen firam ɗin zuwa rufi tare da dogayen sukurori 4.
7. Yanzu haɗe da igiyoyi masu hawa 2 tsakanin LED panel da firam.Wannan yana bawa panel damar rataya daga firam yayin da aka kammala wayoyi.
8. Cire murfin toshe tasha akan direban LED (wanda aka riga an riga an haɗa shi zuwa panel ɗin LED).Wannan matakin yana ɗauka cewa ba za ku yi amfani da shi ba, ko aƙalla kuna buƙatar matsar da gubar da aka riga aka haɗa da filogi 2-pin.
9. Waya mai aiki da jagororin tsaka tsaki kamar yadda aka nuna.Idan an buƙata, dole ne ma'aikacin lantarki ya yi wannan ɓangaren shigarwa.
10. Rufe murfin toshewar tasha.
11. Daidaita wurin hawan igiyoyi idan an buƙata.
12. Tare da panel na LED a saman saman firam ɗin hawa, saka 6 m ƙare gyara sukurori.
13. Kunna wuta baya zuwa da'irar haske.
14. Yi farin ciki da hasken ku na ceton kuzarin da aka ɗora hasken panel LED!