In the modern changeable decoration style, designers and owners are paying attention to every detail of home decoration, so each home decoration materials also have some specific style way, LED triproof light is a special lamps, it is different from other lamps is its special design and structure, can be waterproof, anti-corrosion, anti-oxidation. Also known as the triproof lights, the interior has done a lot of special treatment, but also to ensure the safety and reliability of the circuit when using. And this kind of lamps and lanterns are beautiful and generous, very suitable for modern home decoration, the following Eastrong lighting to tell you about its installation method.
How to install triproof lights?
LED triproof lights are mainly used in highway tunnels, food factories, pharmaceutical plants, hospitals and other humid environments, especially in dusty environments, which play a big role in safe production.
1.Suspending installation: first use 4 M8 bolts to fix the hanging adapter plate on the luminaire, connect the three-core cable through the G3/4 pipe thread port, through the round hole on the side and the introduction port on the side of the lampholder to the luminaire, and then screw the G3/4 pipe thread of the luminaire and the wiring steel pipe with the standard G3/4 pipe thread together.
2.Ceiling installation: According to the size of the installation holes of the lamps and lanterns, hit the corresponding installation bolt holes in the location where the lamps and lanterns are to be installed, and install and fix them with M8 bolts.
How to maintain the tri-proof light?
1.LED tri proof is in use but also to strengthen maintenance, in order to extend its service life. Room lamps should often be wiped with a dry cloth, and pay attention to prevent moisture intrusion, so as to avoid corrosion damage or leakage short-circuit phenomenon; installed in the toilet, bathroom lights must be equipped with moisture-proof lampshade, otherwise it will greatly shorten the service life; installed in the kitchen lights should pay special attention to prevent grease, because the accumulation of grease will affect the brightness of the lamp; light-colored lampshade light transmittance is better, but easy to get dust, to be diligent in wiping, so as not to Affect the penetration of light; lamps and lanterns if non-metal, available wet cloth, so as not to accumulate dust, affecting the lighting effect.
2.Humidity can easily lead to rust, paint, but also shorten the use of lamps and lanterns period. Therefore, moisture is the key to the maintenance of lighting, especially in the bathroom, bathroom lamps and kitchen stove lights, are to install moisture-proof lampshades to prevent moisture invasion, to avoid rust damage or leakage short circuit.
3.Lamps are best not to use water to clean, as long as the dry rag with water can be wiped, if you accidentally touch the water to try to dry, do not use a wet rag to wipe immediately after turning on the light.
4.In the use of lamps and lanterns try not to frequently switch, because the lamps and lanterns in the moment of frequent start, the current through the filament are greater than the normal working current, making the filament temperature rise sharply to accelerate sublimation, which will greatly reduce its service life, so try to reduce the switch of lamps and lanterns.
Post time: Nov-08-2022